Add a subversion fixture repo.

spec/fixtures/subversion-repo/README.txt

+This is a Subversion repository; use the 'svnadmin' tool to examine
+it.  Do not add, delete, or modify files here unless you know how
+to avoid corrupting the repository.
+
+Visit http://subversion.tigris.org/ for more information.

spec/fixtures/subversion-repo/conf/authz

+### This file is an example authorization file for svnserve.
+### Its format is identical to that of mod_authz_svn authorization
+### files.
+### As shown below each section defines authorizations for the path and
+### (optional) repository specified by the section name.
+### The authorizations follow. An authorization line can refer to:
+###  - a single user,
+###  - a group of users defined in a special [groups] section,
+###  - an alias defined in a special [aliases] section,
+###  - all authenticated users, using the '$authenticated' token,
+###  - only anonymous users, using the '$anonymous' token,
+###  - anyone, using the '*' wildcard.
+###
+### A match can be inverted by prefixing the rule with '~'. Rules can
+### grant read ('r') access, read-write ('rw') access, or no access
+### ('').
+
+[aliases]
+# joe = /C=XZ/ST=Dessert/L=Snake City/O=Snake Oil, Ltd./OU=Research Institute/CN=Joe Average
+
+[groups]
+# harry_and_sally = harry,sally
+# harry_sally_and_joe = harry,sally,&joe
+
+# [/foo/bar]
+# harry = rw
+# &joe = r
+# * =
+
+# [repository:/baz/fuz]
+# @harry_and_sally = rw
+# * = r

spec/fixtures/subversion-repo/conf/passwd

+### This file is an example password file for svnserve.
+### Its format is similar to that of svnserve.conf. As shown in the
+### example below it contains one section labelled [users].
+### The name and password for each user follow, one account per line.
+
+[users]
+# harry = harryssecret
+# sally = sallyssecret

spec/fixtures/subversion-repo/conf/svnserve.conf

+### This file controls the configuration of the svnserve daemon, if you
+### use it to allow access to this repository.  (If you only allow
+### access through http: and/or file: URLs, then this file is
+### irrelevant.)
+
+### Visit http://subversion.tigris.org/ for more information.
+
+[general]
+### These options control access to the repository for unauthenticated
+### and authenticated users.  Valid values are "write", "read",
+### and "none".  The sample settings below are the defaults.
+# anon-access = read
+# auth-access = write
+### The password-db option controls the location of the password
+### database file.  Unless you specify a path starting with a /,
+### the file's location is relative to the directory containing
+### this configuration file.
+### If SASL is enabled (see below), this file will NOT be used.
+### Uncomment the line below to use the default password file.
+# password-db = passwd
+### The authz-db option controls the location of the authorization
+### rules for path-based access control.  Unless you specify a path
+### starting with a /, the file's location is relative to the the
+### directory containing this file.  If you don't specify an
+### authz-db, no path-based access control is done.
+### Uncomment the line below to use the default authorization file.
+# authz-db = authz
+### This option specifies the authentication realm of the repository.
+### If two repositories have the same authentication realm, they should
+### have the same password database, and vice versa.  The default realm
+### is repository's uuid.
+# realm = My First Repository
+
+[sasl]
+### This option specifies whether you want to use the Cyrus SASL
+### library for authentication. Default is false.
+### This section will be ignored if svnserve is not built with Cyrus
+### SASL support; to check, run 'svnserve --version' and look for a line
+### reading 'Cyrus SASL authentication is available.'
+# use-sasl = true
+### These options specify the desired strength of the security layer
+### that you want SASL to provide. 0 means no encryption, 1 means
+### integrity-checking only, values larger than 1 are correlated
+### to the effective key length for encryption (e.g. 128 means 128-bit
+### encryption). The values below are the defaults.
+# min-encryption = 0
+# max-encryption = 256

spec/fixtures/subversion-repo/db/current

+3

spec/fixtures/subversion-repo/db/format

+4
+layout sharded 1000

spec/fixtures/subversion-repo/db/fs-type

+fsfs

spec/fixtures/subversion-repo/db/fsfs.conf

+### This file controls the configuration of the FSFS filesystem.
+
+[memcached-servers]
+### These options name memcached servers used to cache internal FSFS
+### data.  See http://www.danga.com/memcached/ for more information on
+### memcached.  To use memcached with FSFS, run one or more memcached
+### servers, and specify each of them as an option like so:
+# first-server = 127.0.0.1:11211
+# remote-memcached = mymemcached.corp.example.com:11212
+### The option name is ignored; the value is of the form HOST:PORT.
+### memcached servers can be shared between multiple repositories;
+### however, if you do this, you *must* ensure that repositories have
+### distinct UUIDs and paths, or else cached data from one repository
+### might be used by another accidentally.  Note also that memcached has
+### no authentication for reads or writes, so you must ensure that your
+### memcached servers are only accessible by trusted users.
+
+[caches]
+### When a cache-related error occurs, normally Subversion ignores it
+### and continues, logging an error if the server is appropriately
+### configured (and ignoring it with file:// access).  To make
+### Subversion never ignore cache errors, uncomment this line.
+# fail-stop = true
+
+[rep-sharing]
+### To conserve space, the filesystem can optionally avoid storing
+### duplicate representations.  This comes at a slight cost in performace,
+### as maintaining a database of shared representations can increase
+### commit times.  The space savings are dependent upon the size of the
+### repository, the number of objects it contains and the amount of
+### duplication between them, usually a function of the branching and
+### merging process.
+###
+### The following parameter enables rep-sharing in the repository.  It can
+### be switched on and off at will, but for best space-saving results
+### should be enabled consistently over the life of the repository.
+# enable-rep-sharing = false

spec/fixtures/subversion-repo/db/min-unpacked-rev

+0

spec/fixtures/subversion-repo/db/revprops/0/0

+K 8
+svn:date
+V 27
+2011-11-18T22:35:00.555031Z
+END

spec/fixtures/subversion-repo/db/revprops/0/1

+K 10
+svn:author
+V 4
+eloy
+K 8
+svn:date
+V 27
+2011-11-18T22:36:39.964845Z
+K 7
+svn:log
+V 14
+Initial commit
+END

spec/fixtures/subversion-repo/db/revprops/0/2

+K 10
+svn:author
+V 4
+eloy
+K 8
+svn:date
+V 27
+2011-11-18T22:36:55.378137Z
+K 7
+svn:log
+V 13
+Second commit
+END

spec/fixtures/subversion-repo/db/revprops/0/3

+K 10
+svn:author
+V 4
+eloy
+K 8
+svn:date
+V 27
+2011-11-18T22:38:20.653871Z
+K 7
+svn:log
+V 10
+add subdir
+END

spec/fixtures/subversion-repo/db/revs/0/0

+PLAIN
+END
+ENDREP
+id: 0.0.r0/17
+type: dir
+count: 0
+text: 0 0 4 4 2d2977d1c96f487abe4a1e202dd03b4e
+cpath: /
+
+
+17 107

spec/fixtures/subversion-repo/db/txn-current

+3

spec/fixtures/subversion-repo/db/uuid

+a66ec713-344f-4902-9a97-2b60e25f44bb

spec/fixtures/subversion-repo/format

+5

spec/fixtures/subversion-repo/locks/db-logs.lock

+This file is not used by Subversion 1.3.x or later.
+However, its existence is required for compatibility with
+Subversion 1.2.x or earlier.

spec/fixtures/subversion-repo/locks/db.lock

+This file is not used by Subversion 1.3.x or later.
+However, its existence is required for compatibility with
+Subversion 1.2.x or earlier.